4
SUGGESTED INSTALLATION TOOLS
(Please use safe pre-cautions)
Spyder Auto highly recommends professional installation
Safety Goggles
Safety Gloves
Soft Towel
Storage Tray / Box
(lay out over work area) (prevent missing parts)
Wire Crimper
Soldering Iron
12v Test Light
Electrical Tape
Volt Meter
Screwdriver
Socket Wrench
Panel Popper
Installation Tips:
· Always wear eye protection and safety gloves to avoid any possible injuries.
· DO NOT cut or connect any wires without identifying them to avoid any possible electrical
shortage.
· Spyder Auto recommends soldering each wire connection for optimal connectivity
· Please check to ensure no electrical connection is exposed after installation
To prevent damage to the product or vehicle, please use electrical tape or zip ties to
organize loose wires.
Note:
Installation may vary depending on vehicle.
Removal of your vehicle's front bumper may be required.
Warning: Please use the recommended safety equipment when installing
Spyder Auto Headlights. Spyder Auto is not liable for any injuries
or accidents that may occur during installation.

---