6
CONDENSATION
Condensation Vs. Water Leak
Manufacturers note: Condensation is a common problem that all lighting manufacturers encounter.
As climate changes, the humidity in the headlights can cause the lens to fog up. Once the
headlights are turned on, the heat produced from the bulb will evaporate and cause condensation.
A.
B.
Lens Fog build up
Water Leak
A. Slight fog or light condensation is normal. If this happens, park your vehicle in the sun to
alleviate the condensation. Then reaseat all gaskets and caps to ensure they are tightly sealed.
B. This is a image of an actual water leak. If this occurs please refer to your warranty
guide either found in your packaging or please visit our website for more information.
To prevent condensation please check that all rubber gaskets,
seals and o-rings are tightly sealed and secured.
Never place the lens down
Fig 2.7
Helpful hints:
· Fitment is not guaranteed if the vehicle has been in a prior collision.
· To avoid scratches and damage to your Spyder Auto Headlight,
Never lay the item on the lens face down. as shown in Fig 2.7
· Do not modify, alter, or tamper with this product in any way.
Failure to comply will void your warranty.
Warning: Do not attempt to re-seal, bake or rinse your headlights out. This can cause
damage to your headlights and its internal electronic components.

---