Transfering / Replacing Bulbs
9
1. Using rubber gloves locate your light blub sockets.
Identify the parking lamp, brake, turn signal, and back up bulb
1157
3157 / 7440
Fig 5.1
1156
Single Filament
Dual Filament
Dual Filament
194
stagger
pins
level
pins
parking light
back up
parking light
parking light
running light
turn signal
and brake light
and brake light
Line up the pins and twist left to unlock, right to lock Line up the black (-) wire
2.Usingrubbergloves;(Fig5.2)twisttheparkinglamp/brakelampsocket
tothelefttounlock.(Fig5.4andFig5.5)pullouttheOEMlightbulb
andconnectthetaillightsockets.Fig5.3,Twistlefttounlock,righttolock
Fig5.61156and1157,lineupthebasepinsandtwistrighttolock.
Fig5.7194and7440plugtheLEDwirefromthetaillampsocketand
Fig5.83157byconnectingbothblack(-)wirestogether.
3. Neatly tuck the excess wiring into the tail lamp and turn the socket
totherighttotightlysecurethesocketintothetaillamps.inFig5.2
4. Reuse your OEM reverse bulb. However, if you have a full LED tail
light you will not use your original reverse bulb.
5. The majority of Spyder Auto's tail lamps use LEDs as working
turn signals. However, if you're tail light does not come with LED
turn signals please use your OEM bulb.

---